Magnet Stick The provides safe and simple checking for the presence of magnetism. Upon testing and without metallic contact, the lamp lights immediately where there is a magnetic field (e.g. an activated coil in a solenoid valve). Equipment can be tested without having to switch it off and magnetic coils can often be tested through their protective cover, saving hours of dismantling time. The responds to all kinds of magnetic fields from alternating or direct current, to permanent magnets. Also available as part of the range, the intrinsically-safe and offshore rigs. ATEX, for use in hazardous areas such as chemical plants, oil refineries Features: * Powerful red light in the tip to indicate presence of a magnetic field * Easy to use * Solenoid valves in pneumatic and hydraulic control equipment can easily be tested * Test relays with coils and electrically controlled solenoid valves in all types of vehicles and machines * Test solenoid valves when servicing oil burners Applications: * Testing operating solenoid valves in pneumatic and hydraulic control equipment * Testing relays with coils and electrically-controlled solenoid valves in all types of vehicles and machines * Testing solenoid valves when servicing oil burners Specifications: Model: Magnet Stick Magnet Stick ATEX Sensitivity: 300 Gauss, (0,3 mT) 300 Gauss, (0,3 mT) Response Time: Immediate Immediate Intrinsically Safe: No Yes Power Requirements: 2 x AAA (LR03) batteries (inc) 2 x AAA (LR03) batteries (inc) RH: 80% @ 30C, 50% @ 40C 80% @ 30C, 50% @ 40C Operating Temp: -20 ~ +50C -20 ~ +50C Overvoltage: CAT III 1000V AC CAT III 1000V AC Dimensions: 145(L) x 18(W) x 20(H) mm 145(L) x 18(W) x 20(H) mm Weight: 35g (inc. batteries) 35g (inc. batteries)